Acura & Honda
BMW
-----Brakes
-----Camera Mounts
-----Data Acquisition
-----Drivetrain
-----Engine
-----Lights
-----Lubricants
-----Miscellaneous
-----Plumbing
-----Safety
-----Steering Wheels
-----Suspension
----------Anti-Roll Bars
----------Bushings
----------Coil Overs
----------Shocks & Struts
----------Springs
----------Suspension Kits
-----Tanks
-----Timing
-----Tools
-----Wheel Spacers
Chevrolet Corvette
Ford, Lincoln, Mercury
Ford Mustang
General Motors
Infiniti & Nissan
Mazda
Mini
Porsche
Brakes
Camera Mounts
Data Acquisition
Drivetrain
Engine
Lights
Lubricants
Miscellaneous
Plumbing
Safety
Steering Wheels
Suspension Components
Tanks
Timing
Tools
Wheel Spacers
Contact & Information
Store Location / Map
|
BMWSuspension
|
 |
Control Arm Bushings For Front & Rear
On the front of vehicles–they make a dramatic improvement in the way they handle, with quicker steering response and greater vehicle control. Whatever your demands, proper alignment (caster and camber) is better maintained by the use of the correct performance durometer of the bushing's material formulation.
On the rear, these control arm bushings are a must for controlling wheel hop and increasing cornering control for competition uses as well as maintaining alignment on and off-road.
All of Energy's control arm bushings are full-floating and non-binding... especially important when ride height is altered or greater suspension load is required. Most are pre-lubricated. This is especially important for both lowered and raised vehicles that have had drastic suspension geometry modifications. Energy's HYPER-FLEX™ performance polyurethane control arm bushings do not rot or deteriorate from oils or atmospheric conditions such as ozone, smog, road salt, chemicals, and other corrosives. They will not deteriorate in a few short years and cause that mushy, uncertain steering response- like rubber O.E.M. ones often do. Most sets come with zinc plated outer metal shells. |
|
 |
Sway Bar Frame Bushings, Sway Bar End Links and Bushings
Improved handling, low cost, and easy installation are just some of the reasons these components are so popular! Dollar-for-dollar, Energy Suspension's sway bar bushings and end links offer the greatest improvement in performance handling on: cars, trucks and sport utility vehicles.
Working with Energy's HYPER-FLEX™ performance polyurethane Sway Bar End Links (for the vehicle control arms, etc.), our HYPER-FLEX™ Sway Bar Bushings (for the vehicle frame) makes the sway bar system much more effective. It does this by the use of increased durometers of the polyurethane bushing components. In effect, it's similar to installing a higher performance, heavier duty sway bar system, but at a fraction of the cost!
Energy's Sway Bar Bushings are available either as Standard or Greaseable Types. Sets come complete with corrosion resistant zinc and gold irradiate-plated strong 3/8" grade 5 bolts, nylon insertlock nuts (to prevent loosening), heavy gauge washers, and mounting brackets.
Additionally, Energy's special formula HYPER-FLEX™ polyurethane material assures long-lasting performance, unlike many O.E.M. rubber components.
These components are very critical to handling of a vehicle. By this very fact, one should definitely consider these components for a great performance upgrade for no matter what you drive! |
|
 |
Tie Rod Dust Boots
At last it is possible to replace a damaged tie rod dust boot without having the expense of buying an entire new tie rod! (Typically when tie rods are worn, an entirely new tie rod end is need and the additional expense of a suspension alignment is required.)
These exclusively engineered Energy Suspension ® boots resist damage from rocks, sand, water, road salt, and oils better than many other O.E.M. rubber boots.
All boots have a 5 Point Sealing Action, which not only prevents loss of tie rod lubricant but also inhibits contamination (the major cause of rod wear)! |
|
|
Note: Bushing are usually available in red or black. For product color add R for red or G for black after each part number.
|
|
|
|
|
|
| Energy Suspension - BMW |
Years |
Description |
Black |
Red |
Price |
| 318i, 325i, 328i |
92 - 99 |
Front Sway Bar Frame Bushings, 23 mm |
12.5101G |
12.5101R |
$19 |
| 318i, 325i, 328i |
92 - 99 |
Front Sway Bar Frame Bushings, 24 mm |
12.5103G |
12.5103R |
$19 |
| 318i, 325i, 328i |
92 - 99 |
Front Sway Bar Frame Bushings, 25 mm |
12.5104G |
12.5104R |
$19 |
| 525i, 530i, 535i, 540i |
89 - 95 |
Front Sway Bar Frame Bushings, 23 mm |
12.5101G |
12.5101R |
$19 |
| 525i, 530i, 535i, 540i |
89 - 95 |
Front Sway Bar Frame Bushings, 24 mm |
12.5103G |
12.5103R |
$19 |
| 525i, 530i, 535i, 540i |
89 - 95 |
Front Sway Bar Frame Bushings, 25 mm |
12.5104G |
12.5104R |
$19 |
| 525i, 530i, 535i, 540i |
89 - 95 |
Complete Rear Sway Bar Frame Bushings, 14.5 mm |
12.5102G |
12.5102R |
$15 |
| 2002 |
64 - 76 |
Front End Control Arm & Strut Bushing Set |
12.3101G |
12.3101R |
$76 |
| 2002 |
64 - 76 |
Rear End Trailing Arm & Diff Mount Bushing Set |
12.3102G |
12.3102R |
$48 |
| 2002 |
64 - 76 |
Tie Rod Boots |
9.13103G |
9.13103R |
$4 |
| Z3 Roadster |
96 - 02 |
Front Sway Bar Frame Bushings, 23 mm |
12.5101G |
12.5101R |
$19 |
| Z3 Roadster |
96 - 02 |
Front Sway Bar Frame Bushings, 24 mm |
12.5103G |
12.5103R |
$19 |
| Z3 Roadster |
96 - 02 |
Front Sway Bar Frame Bushings, 25 mm |
12.5104G |
12.5104R |
$19 |
|
