Acura & Honda
BMW
Chevrolet Corvette
Ford, Lincoln, Mercury
Ford Mustang
General Motors
Infiniti & Nissan
Mazda
Mini
-----Brakes
-----Camera Mounts
-----Data Acquisition
-----Drivetrain
-----Engine
-----Lights
-----Lubricants
-----Miscellaneous
-----Plumbing
-----Safety
-----Steering Wheels
-----Suspension
----------Alignment
----------Anti-Roll Bars
----------Coil Overs
----------Shocks / Struts
----------Springs
----------Suspension Kits
-----Tanks
-----Timing
-----Tools
-----Wheel Spacers
Porsche
Brakes
Camera Mounts
Data Acquisition
Drivetrain
Engine
Lights
Lubricants
Miscellaneous
Plumbing
Safety
Steering Wheels
Suspension Components
Tanks
Timing
Tools
Wheel Spacers
Contact & Information
Store Location / Map
|
MiniSuspension
|
Camber Plate Kits: The set allows for camber adjustment from negative .25 to just over negative 4 degrees. The set will not alter the ride height of the Mini and does not require any modifications to the central strut hole in the tower. The H Sport Blue anodized billet aluminum cap is doughnut shaped for easy access to adjustable struts. The bearing section of the set does not utilize noisy mono-balls but instead relies on a Delrin bushing system that's virtually maintenance free. The bearing cassette is encased by two polyurethane bushings for smoother operation and vibration elimination. The set also includes H Sport's own upper spring hats which are CNC machined and powder coated H Sport Blue. Adjustability is accomplished by loosening the three strut top nuts and fine-tuning by hand. In order to optimize the adjustability range, two holes per side must be drilled to relocate the strut studs.
Note: Fits 3/02 and later build only. Not Recommended for use with Spax coil overs. |
|
 |
|
 |
Camber Plate Kit - Competition: The Competition Camber Plate Set is designed for 2.25" coil-over type springs. For use with coil overs only.
Camber Plate Kit - Sport: The Sport Camber Plate Set is designed for OE diameter springs. Designed for use with standard springs, not coil overs. For coil over applications use 30810, or upgrade 30800 with part #30800C
Camber Plate Upgrade - Competition: The Competition Upgrade Kit is available for those who have the Sport Camber Plate Set but are planning to change to coil-overs from a standard OE diameter spring. This Kit will allow you to keep the entire Camber Plate Set except for the spring hats which will be replaced by the upgrade kit hats. This simple spring hat swap will allow you to use a coil-over set without any fitment issues. For use with 2.5" Diameter coils. |
|
|
Camber Links Rear - Competition: Hotchkis Sport Competition Rear Camber Links are designed for those competitors that want that extra bit of rear adjustability. In this case, the second pair of Links replaces the upper arms and is fully adjustable as are the lower Links. Essentially, the rear track can be adjusted slightly to enhance the overall grip level in the rear through a corner. Each Competition Camber Link set comes complete with the fully built arms and a stability sensor bracket for those with that option on their Minis. The Links themselves are made up of two tubular steel outer arms with a billet aluminum hex center. The polyurethane bushings can be greased by utilizing the zerk fittings at each end. Durable, yet highly functional, the Sport Camber Links give you the freedom to set your Mini's rear camber at any setting. |
|
 |
|
 |
|
|
| Camber Links Rear - Sport: Hotchkis Sport Rear Camber Links are perfect for lowered Minis. They have an adjustment range from zero to negative four degrees for increased rear grip. Each Link is simply adjusted by loosening the lock nuts and then rotating the hex center for more or less camber. The Sport Rear Camber Links are designed and tested to suit any street or track environment. Each Link comes fully built from H Sport and is pre-set to the stock length. With the Links pre-set to the stock length, you can then use that camber setting as your new baseline. The Links themselves are made up of two tubular steel outer arms with a billet aluminum hex center. The polyurethane bushings can be greased by utilizing the zerk fittings at each end. Durable, yet highly functional, the Sport Camber Links give you the freedom to set your Mini's rear camber at any setting. |
|
|
|
|
|
|
|
| HSport - Mini |
Years |
Description |
Adjustment |
Weight |
Kit P/N |
Price |
| COOPER, S |
2002-2006 |
REAR CAMBER LINKS (2 LOWER) |
|
6 |
13800 |
$268 |
| COOPER, S |
2002-2006 |
REAR CAMBER LINKS (2 LOWER & 2 UPPER) |
|
12 |
13810 |
$507 |
| COOPER, S |
2002-2006 |
FRONT CAMBER PLATES KIT, STOCK DIAMETER COILS |
(0° TO -2°) |
11 |
30830 |
$551 |
| COOPER, S |
2002-2006 |
SPRING SEAT UPGRADE FOR USE WITH 2.25" DIAMETER COILS |
|
4 |
30830-225 |
$74 |
| COOPER, S |
2002-2006 |
SPRING SEAT UPGRADE FOR USE WITH 2.50" DIAMETER COILS |
|
4 |
30830-250 |
$74 |
| COOPER, S |
2002-2006 |
FRONT CAMBER PLATES KIT, 2.25" DIAMETER COILS |
(0° TO -3.6°) |
11 |
30832 |
$551 |
| COOPER, S |
2002-2006 |
FRONT CAMBER PLATES KIT, 2.50" DIAMETER COILS |
(0° TO -3.6°) |
11 |
30835 |
$551 |
|
