 |
|||||
 |
|||||
| 2021 Las Positas Court #145 Livermore, CA 94551 | |||||
| PHONE: (925)292-5522 |
FAX: (925)292-5524
|
||||
| E-MAIL: Sales@LPIRacing.com To order On-Line go to LPIRacing.com |
|||||
| Back | Home | Check Out our new Website that offers an excellent Search Function and On-Line Ordering!! |
| Products |
Brakes
Camera Mounts
Data Acquisition
Drivetrain
Engine
Lights
Lubricants
Miscellaneous
Plumbing
Safety
Steering Wheels
Suspension Components
Timing
Tools
| Car Specific Products |
Acura & Honda
BMW
Chevrolet Corvette
Ford, Lincoln, Mercury
Ford Mustang
General Motors
Infiniti & Nissan
Mazda
Mini
Porsche
| Company Information |
Contact & Information
Store Location / Map
| Race Technology | ||||
| Data Logger | Sensors | Interface | ||
| Display Products | Accessories | Video |
Race Car Data Book $79.95
 |
DL1 and DASH2 Package Deal The DL1 and DASH2 package deal combines Race Technology's two most popular products together with a memory card and reader to get you started, all at an unbeatable price. The package includes: * DL1 data logger * DASH2 display * 512MB Compact Flash card * USB 2.0 card reader * Race Technology software CD |
|
|
The DL1 is a highly flexible, powerful data logging system. Featuring an integrated, high accuracy, 5Hz GPS receiver, with data logging directly to compact flash. It is ideally suited to auto sport applications as well as bikes, boats and industrial/professional applications. The DASH2 is a slimline, water resistant (IP65) data display system, with a custom backlit LCD screen, 6 fully configurable shiftlights, and a diecast aluminium enclosure. With configurable display screens, independent alarms and the ability to accept sensor signals independently and via the DL1. The feature packed DASH2 can be tailored to fit almost any automotive display application When the DASH2 is connected to the DL1, it can be configured to display parameters including real time lap and sector times calculated from GPS data without the need for a trackside beacon. Any sensor data being logged by the DL1 can also be displayed in real time on the DASH2 via the serial connection. The actual data that the DASH2 displays, as well as the units etc can all be configured from a PC to the user's exact requirements. A 512MB compact flash card and USB 2.0 card reader are included in the package to get you started logging and transferring data. A 512MB card, as a guide, when used with the DL1 this card will provide logging capacity sufficient for all channels for approximately 20 hours. The card reader is suitable for use with a laptop or desktop PC. No drivers required for 2000/ME/XP/Vista, simply plug it in and any inserted compact flash card will appear as an additional drive on your machine. For more detailed information on the DL1 and DASH2 please visit their dedicated product pages. Please note: DASH2 and DL1s bought as a package deal are sold as a package and as such their compatibility is locked together. Attempting to split the package will result in compatibility issues. |
||
| Back | LPI Racing (925)292-5522 | Top of Page |
| Race Technology Display Products To complement the Race Technology data loggers and perfomance meters we also offer a range of display products. These are designed for in-vehicle real time display of the data from Race Technology loggers and performance meters, or in the case of the DASH2, the option to be used as a stand alone road-legal dashboard. |
|||
| Dash1 Large clear backlit display 5 user configurable screens with values, bargraphs, or both. CNC machined aluminum case, sealed to IP65 |
|||
 |
|||
| The DASH1 is a compact, robust, water resistant data display system for use with Race Technology's range of data logging products. Once the DASH1 is connected to one of Race Technology's data loggers, it can be configured to display many key parameters including real time lap and sector times calculated from GPS data, any available analogue measurements (e.g. temperatures and pressures), RPM, wheel/shaft speeds etc. The actual data displayed can be set up for the users specific requirements. You can also set independent alarms for all channels. | |||
 |
Dash2 Integrated high brightness shift lights High contrast display with blue backlight Road legal Stand alone or with advanced data logging The DASH2 is a slimline, water resistant (IP65) data display system, with a custom LCD screen and a diecast aluminium enclosure for use either as a standalone unit or with Race Technology's range of data logging products. |
|
| With configurable display screens, independent alarms and the ability to accept signals from up to six external sensors when used in standalone mode, the DASH2 can be tailored to fit almost any automotive display application. With a suitable ECU adaptor the DASH2 can even receive and display data directly from your engine management system. | ||
 |
Dash3 2 Versions available - Dash3 and Dash3lite Configurable backlite display and shift lights Optional windscreen mount and suction cup The DASH3 is a data and lap time display that is designed to work with Race Technology's range of data logging products. It is the smallest display in Race Technology's range and can be used to provide either supplementary information alongside other instruments, or as the primary source of information in some race applications. |
||
| Physically, the DASH3 is housed in a small injection moulded case and is controlled by a sealed membrane keypad. The display is a custom made graphics panel which has been designed to be clear and readable from almost any angle and under any lighting conditions. The DASH3 comes in 2 versions, the DASH3 and the DASH3lite: * The DASH3lite is designed primarily as a lap time display, but also displays speed and has the configurable shift lights. * The standard DASH3 has all the features of the DASH3lite, but in addition can be configured to display almost any combination of numerical displays, graphs and bar charts of any variable and also display warning etc. This makes it a very flexible solution to all of your data displaying needs. |
|||
| Back | LPI Racing (925)292-5522 | Top of Page |
| Race Technology Sensors | |||
 |
Race Technology now offers from stock a range of high quality sensors that is recommended for use with Race Technology's data logging systems or for other autosport applications. All of Race Technology's sensors are selected, tested and calibrated by Race Technology to ensure they are robust enough for the application and give consistently reliable results. | ||
| Back | LPI Racing (925)292-5522 | Top of Page |
| Race Technology Accessories | |||
 |
Race Technology also stocks a wide range of accessories to complement its data logging, GPS measurement and data display products. These include cables, mounting brackets, power supplies, antennas, cases, connectors and memory cards. | ||
| Race Technology Cables Race Technology's offer a range of communication cables and adapters to allow interconnection of Race Technology's range of data logging and display units, and connection to a PC for setup and monitoring. Race Technology's also provide high temperature cable by the metre, as used on Race Technology's range of sensors, that is suitable for a wide range of autosport and industrial applications. |
|||
| High Temperature Cable High temperature 3 core screened cable, ideal for auto sport use. Light weight and very strong. * Overall diameter 2.7mm * Conductors are made up of 7 x 0.2mm silver plated copper wire insulated with PFA. Conductors are Red, orange and white * Screened in tin plated copper * Covered in a black PFA insulator * Maximum operating temperature >200 degrees Celsius |
|||
| Spare serial cable Replacement serial cable to connect your data logger to your computer for data download, monitoring or reflashing. Approximate length 2m. |
|||
 |
USB to Serial Adapter If your laptop or PC does not have a serial port that can be used to communicate with your data logger or display unit then you will need a serial to USB adapter. We use these adapters all the time in the Race Technology office and they work very well. |
||
 |
Data logger carrying case A sturdy moulded polypropylene case with coloured catches and integral handle. Custom cut interior foam to accommodate a range of data loggers (such as AX22, DL1 or DL2), a windscreen mount, GPS antenna, 2 x compact flash cards and a selection of cables. |
|
| GPS Antennas Antennas are magnetic mounting, patch type antennas, since these are the best type to use for the automotive application where they can simply be placed on the top of the roof. |
|||
 |
Standard GPS antenna A very high quality magnetic mounting GPS antenna. Race Technology has tested many types - and this came out the best by a clear margin. It's completely waterproof, reliable, very sensitive to weak signals and rarely suffers from radio interference. The connector is an SMA type, and it requires a 2.5v-5.0v supply - which it receives from the data logger. |
||
| RF-interference rejecting GPS antenna On several occasions Race Technology's has found that the otherwise excellent standard GPS antenna can have trouble obtaining a GPS lock in very RF-noisy environments, such as at professional race meetings where outside broadcast vans, telemetry equipment used by racing teams to communicate with the vehicles and many other strong RF sources can mask the weak GPS signal. On these occasions Race Technology's has solved the problem by supplying this RF-interference rejecting GPS antenna, which can retain lock even in extremely noisy environments. The antenna is slightly more noisy than the standard antenna in normal circumstances, so should only be purchased if an RF interference problem is either known or suspected. The connector is an SMA type, and it requires a 2.7v-5.0v supply - which it receives from the data logger. |
|||
 |
|||
|
Low-noise GPS antenna This antenna has been found in testing to give slightly lower noise on the signal and data received under some circumstances. For most customers, this is unlikely to give any perceivable benefit, and we would recommend selecting the standard antenna. However, some customers, particularly in the industrial testing sector, may find this antenna gives some improvement in the quality of the recorded data. This antenna may be of particular interest to those using the SPEEDBOX-RTK unit, since this antenna may sometimes aquire or retain an RTK lock where the standard antenna cannot, when the GPS signal quality is marginal for the RTK system to lock-on. The connector is an SMA type, and it requires a 2.7v-5.0v supply - which it receives from the data logger. |
||
| Data Logger Mounting Brackets Windscreen mounts and angle brackets are available to purchase separately. The former allows quick and easy but firm and secure installation of any of our products, while the angle brackets are designed for a more permanent installation of any of our slotted case products. |
||||
 |
||||
| Windscreen suction mount Replacement windscreen suction mount designed initially for the AX22, but may also be used with almost all data loggers, performance meters and display units. Made in Germany from very high quality materials. It provides a rigid, stable mount for the performance computer - just what is required for accurate data. |
||||
 |
||||
| Pair of aluminium mounting brackets Pair of aluminium brackets that can be used to more permanantly fix any slotted case product to a vehicle - this means that they are suitable for the AX22, DL1, VOB or IMU06. |
||||
| Power Supplies and Cables Replacement power supply cables, as shipped with each of our data logging units, are available to purchase separately. These are designed to connect to a 12V source in-vehicle - either via a cigar lighter socket or directly wired to the vehicle harness (in-line fuse recommended). Race Technology's also offer battery pack and mains power supply options for applications where a convenient 12V supply is not available. |
|||
| DL1/AX22 Battery Pack and Charger For applications where a 12v power source isn't readily available to run the data logger or performance meter, you can use this optional battery pack. The battery pack will typically power the DL1 data logger or AX22 performance meter for approximately 5 hours continuous use, but this also depends on the number of ancillary units and sensors powered from the unit. The kit includes: * Ni/Cd battery power pack * Charger for the battery pack (10 hour charging time) * Connectors for battery pack to data logger and battery pack to charger |
|||
| Mains Power Supply Optional mains adapter for Race Technology's data loggers and performance meters so that they can be powered up and operated without connection to the vehicle power supply. This is a high quality "switched mode" power supply that operates between 100v and 250v AC. |
|||
 |
|||
| 12v Power Lead Replacement 12v power lead for the AX22 or DL1. The power lead goes from the AX22 or DL1 to a standard car 12v "cigar lighter style" connector. |
|||
| DL2 Battery Pack and Charger For installations with no 12v power supply available, the DL2 can be fitted with an internal battery pack. This high quality unit will give up to 12 hours continuous logging from a single charge (depending on the number of ancillary units and sensors also powered from the DL2). The battery pack option consists of: * High output Ni/Mh battery pack * Replacement deep lid for DL2, to accommodate battery pack * High quality mains charger with DL2 connector, compatible with UK, US and European mains supply |
|||
| Data Storage Products The majority of Race Technology's data loggers and performance meters use memory cards in the standard Compact Flash format. These cards are available to purchase separately, along with Compact Flash card readers to transfer the data from the Compact Flash card to the PC. |
|||
 |
512MB compact flash card 512MB compact flash for use with our products. As a guide, when used with the DL1 this card will provide logging capacity sufficient for all channels for approximately 20 hours. |
||
 |
USB 2.0 Compact Flash Card Reader A USB 2.0 compact flash card reader. Suitable for use with a laptop or desktop PC. No drivers required for 2000/ME/XP, simply plug it in and any inserted compact flash card will appear as an additional drive on your machine. |
||
| Switches and Buttons External switches and buttons for use with Race Technology's data loggers, performance meters and display units, as appropriate. |
|||
| External start/stop button and indicator Universal momentary push to make button suitable as an external start/stop logging button for the AX22, DL1 or DL2. May also be used for the optional external buttons with the DASH2. This is a high quality well-sealed water resistant button with built-in indicator LED to clearly show on/off status. |
|||
 |
|||
| DASH2 Button Set The DASH2 display unit can be used with an optional set of four external buttons to control certain configuration options and allow scrolling between the different display screens. These buttons have been specially selected for this purpose. Key features include: Discrete black button and black bezel Water resistant sealing to IP67 standard Small enough to be easily installed yet large enough to be operated with gloved hands Good tactile feedback Integral cables for connection to DASH2 wiring harness Designed for panel mounting (13mm diameter hole required Supplied as a set of four (MENU, SELECT, UP and DOWN for DASH2) |
|||
 |
|||
| Connectors Spare connectors for the DL1 & DL2 data loggers and AX22 performance meter are available to purchase separately. These are particularly useful if one unit is to be used in multiple vehicles - then it is easy to transfer the logger or performance meter without having to also disturb all of the electrical installation |
||||
 |
AX22 screw connector block Replacement 4 way screw connector block for the rear of the AX22. |
|||
 |
DL1 screw connector blocks Pictured is the pair of single row "Green" connectors as used on the Mk1 (early) DL1s. Mk2 (later and current) DL1s use a double row "Black" connector. |
|||
| Back | LPI Racing (925)292-5522 | Top of Page |
| ECU Interfaces The Race Technology ECU interface is a small in-line module for use with a DASH1 or DASH2 display, a DL1 or DL2 data logger or any combination of data logger plus display, to allow data from your engine management system to be displayed and recorded. Various models are available to suit ECUs with CAN or serial outputs, as well as production vehicle CAN OBD2 or Serial OBD2 ports. |
||
 |
Serial OBD2 Interface system Gets data from production ECU's using the standard OBD "On Board Diagnostics" connector Compatible with all Race Technology displays and loggers The serial OBD2 system reads data directly from the vehicles OBD2 "On Board Diagnostics" port. The system translates the available data from the OBD2 port to a format that Race Technology's displays and loggers can use. |
|
| Vehicle Compatibility: The Serial OBD2 interface is specifically for use with production vehicles (or other vehicles using production ECUs) which do not use CAN (Controller Area Network) technology for their OBD2 output. In the US market, this includes all production vehicles of model year 1996 and after, until roughly 2002. CAN was phased in between roughly 2003 and 2008, with German automobiles typically adopting it sooner than US and Japanese. Vehicles with the newer CAN OBD2 technology will need Race Technology's CAN OBD2 Interface. The Serial OBD2 Interface will work with vehicles using IS09141-2 and SAEJ1850 VPW or PWM technologies. Race Technology's do not have a product compatible with older OBD1 vehicles unless they have an aftermarket ECU. |
||
 |
||
| CAN OBD2 Interface System Gets data from production ECU's using the standard OBD "On Board Diagnostics" connector Compatible with all Race Technology displays and loggers The CAN OBD2 system reads data directly from the vehicles OBD2 "On Board Diagnostics" port. The system is configured to extract the required data from the OBD2 port, so that it can be used with Race Technology's loggers and displays. |
||
| Vehicle Compatibility: The CAN OBD2 interface is specifically for use with production vehicles (or other vehicles using production ECUs) which use CAN (Controller Area Network) technology for their OBD2 output. In the US market, this includes all production vehicles of model year 2008 and after. CAN was phased in between roughly 2003 and 2008, with German automobiles typically adopting it sooner than US and Japanese. Vehicles with earlier OBD2 technologies will need Race Technology's Serial OBD2 Interface. |
||
 |
||
| ECU interface - CAN Optain data directly from ECU Compatible with a wide range of ECU's Compatible with all Race Technology displays and loggers |
||
| What is the CAN ECU interface? The Race Technology ECU interface is a small in-line module for use with a DASH1 or DASH2 display, a DL1 or DL2 data logger or any combination of data logger plus display, to allow data from your engine management system to be displayed and recorded. The CAN interface is compatible with vehicle ECUs using the Bosch Controller Area Network (CAN) communications system, otherwise you will need the Serial Interface. Who is the CAN ECU interface designed for? The ECU interface is designed for anyone wishing to read vehicle or drive train sensor data directly from their ECU, without the need for additional sensors, and whose ECU communicates via CAN. Common parameters such as engine speed, coolant temperature, throttle position, etc, are normally available from the ECU, so no additional sensors would be required if using the ECU interface. This leaves the analogue input channels on your data logger free for connection to more specialised sensors, not normally monitored by your ECU (eg: suspension travel). ECUs are being added to the compatibility list all the time. ECU Compatibility: Please contact Race Technology to confirm compatibility with your ECU. Please note that the base CAN ECU interface is not configured for any ECU, it needs to be configured. If you do not have ECU or manufacturer-specific CAN parameter information, do not purchase the base version. If you have a vehicle with CAN-enabled OBD2 you may wish to consider the CAN OBD2 adapter. Key Features * Compatible with Race Technology displays and data loggers as stand alone units, or as part or a data logger and display system * Receive data from existing vehicle sensors via your ECU - no need to add additional sensors for data logging. All channels from ECU are in addition to the channels already provided with the Race Technology data logger/display * CAN interface fully user configurable with software supplied. Programmable for virtually any vehicle or ECU using standard CAN protocols. Select which channels to receive and decode. * Upgradeable firmware. * Robust CNC machined aluminium enclosure (3.5 cm x 2.5 cm x 1 cm) with potted electronics * Supplied with cables, instruction manual and comprehensive software CD |
||
|
ECU interface - Serial Optain data directly from ECU Compatible with a wide range of ECU's Compatible with all Race Technology displays and loggers |
|
| What is the ECU interface? The Race Technology ECU interface is a small in-line module for use with a DASH1 or DASH2 display, a DL1 or DL2 data logger or any combination of data logger plus display, to allow data from your engine management system to be displayed and recorded. Who is the ECU interface designed for? The ECU interface is designed for anyone wishing to read vehicle or drive train sensor data directly from their ECU, without the need for additional sensors. Common parameters such as engine speed, coolant temperature, throttle position, etc, are normally available from the ECU, so no additional sensors would be required if using the ECU interface. This leaves the analogue input channels on your data logger free for connection to more specialised sensors, not normally monitored by your ECU (eg: suspension travel). ECUs are being added to the compatibility list all the time. Please contact Race Technology to confirm compatibility with your ECU. Key Features * Compatible with Race Technology displays and data loggers as stand alone units, or as part or a data logger and display system * Compatible with a wide range of ECUs * Receive data from existing vehicle sensors via your ECU - no need to add additional sensors for data logging All channels from ECU are in addition to the channels already provided with the Race Technology data logger/display * Serial interface is reprogrammable for a wide range of popular ECUs, with further models being added all the time * Upgradeable firmware. Both the CAN and serial interfaces are flash upgradeable with firmware updates * Robust CNC machined aluminium enclosure (3.5 cm x 2.5 cm x 1 cm) with potted electronics * Supplied with cables, instruction manual and comprehensive software CD |
||
| Back | LPI Racing (925)292-5522 | Top of Page |
| Video Products Race Technology's video products are designed to work in conjunction with Race Technology's data logging products to produce perfectly synchronized video and data. Having the logged data displayed visually and in time with the video, presents an easily accessible result, which lends itself to many applications. With customizable data overlays and Race Technology's intuitive software package, the level of data required is entirely up to you and your application, whether its driver training, track days or industrial applications. |
||
 |
||
| VIDEO4 Video and data logging system Perfectly synchronised data and video Overlay high resolution color graphics Record vedeo from up to 4 cameras |
||
| The VIDEO4 is a state of the art, solid state, combined video and data logging system. It features four video inputs and one video output. The VIDEO4 overlays high quality graphics and records the video - along with perfectly synchronised data - onto a removable flash memory card. The video can then be viewed on a PC, using our standalone player, or used to automatically generate a DVD. It also allows you to load both the data and the video directly into Race Technology's analysis package. Who is the VIDEO4 designed for? The VIDEO4 was initially designed for autosport applications in drag racers, single seater racing cars, rally cars and road cars - it is, however, also ideally suited to use in power boats and on motorcyles. The unit may be used for all types of car testing within the auto-industry and can provide a vital tool for road safety and race training within driving schools. What does the VIDEO4 do? The VIDEO4 conducts the following, key functions: * Takes video from up to four standard composite cameras * Combines the video from the four inputs, in almost any combination, as picture-in-picture inputs * Overlays a high resolution, full color, fully configurable graphics overlay * Records a synchronised data stream from any of Race Technology's data logging products * Stores both the video and the data to a single removable memory card. PC software is supplied to: * Configure the unit * View the video on a PC (with no data) * Generate a DVD from the video (complete with menus and titles) * Perform detailed simultaneous analysis of the data and video using Race Technology's powerful data analysis system |
||
| Back | Top of Page | |
 |
LPI Racing 2021 Las Positas Court #145, Livermore CA 94551 Phone: (925)292-5522 E-mail: Sales@LPIRacing.com |
|