 |
||||||||
 |
||||||||
 |
||||||||
| 3987 First Street, Suite G, Livermore, CA 94551 | PHONE: (925)292-5522 | |||||||
|
FAX: (925)292-5524
|
E-MAIL: Sales@LivermorePerformance.com
|
|||||||
| Back | Home |
| Products |
Brake
Camera Mounts
Data Acquisition
Drivetrain
Engine
Lights
Lubricants
Miscellaneous
Plumbing
Safety
-----Driver Cooling
-----Fire Ext. / Systems
----------Fire Ext. Mounts
---------------BMW (E36)
---------------Chevrolet
---------------Chevrolet Corvette
---------------Ford GT
---------------GMC
---------------Hummer
---------------Mini
---------------Porsche
-----HANS®
-----Harnesses
-----Helmets
-----Racewear
-----Roll Bars
-----Seats
-----Window Nets
Steering Wheels
Suspension Components
Tanks
Timing
Tools
Wheel Spacers
| Car Specific Products |
Acura & Honda
BMW
Chevrolet Corvette
Ford, Lincoln, Mercury
Ford Mustang
General Motors
Infiniti & Nissan
Mazda
Mini
Porsche
| Company Information |
Contact & Information
Store Location / Map
 |
 |
 |
||||
| Brey-Krause | Livermore Performance | Safecraft | ||||
| Fire Extinguisher Mounts | Fire Extinguisher Mounts -Ford GT | Hand Held Extinguishers | AT, LT or RS Model Systems | |||
| Billet Bracket | Mount Clamp for installed Systems | |||||
| Brey-Krause Fire Extinguisher Mounts | ||||||||||
 |
||||||||||
 |
||||||||||
 |
||||||||||
 |
||||||||||
|
Dodge Ram
|
Ferrari Testarossa
|
Subaru WRX
|
Universal Fire Extinguisher Mount
|
|||||||
| Brey-Krause Fire Extinguisher Mount to Roll Bar The R-9521 and R-9522 is designed to allow you to mount a fire extinguisher directly to your roll bar or roll cage. The R-9521 and R-9522 can be used with either a standard 2.5 lb fire extinguisher mount or the R-9520 quick release mount. All aluminum construction makes for a safe mount that doesn't add a lot of weight to your car. Don't let a poorly secured fire extinguisher ruin your next trip to the track. Safety inspectors aren't letting them pass and neither should you. |
|||||||
 |
|||||||
 |
|||||||
 |
|||||||
 |
|||||||
| R-9521 1 1/2" Weight: 0.70 lbs. Installation: Attaches to any 1.5" or 40 mm roll bar Miscellaneous: Inserts are included for both 1.5" and 40 mm |
R-9522 1 3/4" Weight: 0.85 lbs. Installation: Attaches to any 1.75" roll bar |
||||||
| Back | Livermore Performance (925)292-5522 | Top of Page |
| Safecraft, HALON 1211, Discharge Head Hand Held Fire Extinguishers. | |||||
 |
SAFECRAFT MODEL PB DESCRIPTION Safecraft's Model PB removable extinguisher system was designed specifically for vehicle use. It has a unique machined billet aluminum head that looks great with any of the cylinders listed below. The Model PB must use the Safecraft billet bracket for mounting. Whether your vehicle is a monster truck or a two seat sports car, these removable systems work and look great. All Model PB systems are 2 ½ pound Halon 1211. # Machined Billet Head # 2.50 Lb. Halon 1211 # White, Red or Black Gloss Aluminum Cylinder Available Options * Polished Stainless Steel Cylinder * Black Wrinkle Finish Aluminum Cylinder * Billet Mount Bracket * Ford GT specific Billet Bracket specifically to fit on the trans tunnel of the Ford GT. |
||||
|
Picture shows Billet Bracket installed
|
|||||
| SAFECRAFT MODEL PC DESCRIPTION The Model PC is more traditional removable extinguisher system. The valve body is chrome plated and the cylinder is mildly polished stainless steel. The Model PC is 2 ½ pound Halon 1211. # Chrome Head # 2.50 Lb. Halon 1211 # Polished Stainless Steel Cylinder # Dual strap stainless steel bracket standard Available Options * Billet Mount Bracket |
|||||
 |
|||||
Note: L) Available in limited quantities. |
| Back | Livermore Performance (925)292-5522 | Top of Page |
|
SAFECRAFT BILLET MOUNT BRACKETS - for removable fire extinguishers |
|||
 |
Safecraft's machined billet mount bracket for removable extinguisher systems adds that craftsman's touch to you vehicle. The bracket is machined from billet aluminum with a quick release pin for fast removal. The pull knob is even machined aluminum and then laser etched. Will fit all Safecraft removable 1.25 pound and 2.50 Model PB & PC removable extinguisher systems # Billet machined aluminum # Quick release # Can be mounted to any flat surface or to all Brey Krause seat bracket |
||
| Back | Livermore Performance (925)292-5522 | Top of Page |
| SAFECRAFT MODEL AT EXTINGUISHERS The Model AT extinguisher is an automatic, thermally activated extinguisher that can be used in many different types of applications. This extinguisher is designed for fuel cell areas, engine bays, enclosed power units, electrical generating compartments and anywhere automatic protection is needed. The Model AT does not require any electrical power so the area in which it is installed is protected 24 hours a day. The thermal sensor is a unique design that is very small and acts as the discharge nozzle. To prevent damage to the thermal discharge head, the sensor has a rugged guard. The sensor can be located directly on the head of the Model AT or can be located on a flexible discharge line. All Model AT cylinders are DOT approved and can be recharged. The optional pressure switch can be used to electrically monitor the internal pressure and give a remote discharge indication or to interrupt an electrical circuit. The extinguisher uses Halon 1211 or DuPont FE36 extinguishing agent depending on the application. The extinguisher is supplied with a mounting bracket's and clamps that make installing the unit very easy. |
||||
| Model AT3, AT5 and AT10 Automatic Thermal Extinguisher Key Features * 286 Degree Temp Setting * Fast temperature response. * Selectable temperature settings (135, 155, 175, 200, 286, 360 and 500° F) * Rugged thermal sensor with guard. view photo * High pressure DOT approved cylinders in 3, 5 and 10 pound sizes. * Pressure gauge * Complete kit with mount brackets and clamps. Available Options * Electrical circuit interrupting pressure switch. * Discharge line lengths for remote sensor. * Halon 1211 or DuPont FE36 extinguishing agents. |
||||
 |
 |
|||
| Rugged thermal sensor with guard. | ||||
| Back | Livermore Performance (925)292-5522 | Top of Page |
| SAFECRAFT MODEL LT EXTINGUISHERS The Model LT fire extinguisher is a light weight design used in both circle track and drag racing. Along with the light weight cylinder, the Model LT has a very compact discharge head which gives it a smaller overall size. Another feature not found on even more expensive racing extinguishers is the "swivel" head design. The activation portion of the discharge head can be rotated to align with the pull cable, push cable or push knob. This provides much more installation flexibility. The discharge head is machined from billet aluminum and anodized for great looks and has two separate discharge ports. This lets you run separate lines to the driver and engine. Model LT extinguishers are available with either Halon extinguishing agent or FE36 extinguishing agent. Depending on rule book requirements, temperature considerations and the installation would determine which agent should be used. If environmental considerations are required, or if you are going to export the system to a country that no longer allows the use of Halon, then FE36 should be used. DuPont FE36 is a Halon substitute with properties very similar to Halon 1211. The aluminum cylinder is DOT approved and can be refilled. Model LT extinguishers are available in 3, 5 and 10 pound Halon capacities and 5 or 10 pound foaming agent capacity. All extinguishers come standard in white powder coated cylinder with brushed aluminum anodized head. Polished cylinders on 5 & 10 pound systems are available. Foaming agent extinguishers have brushed aluminum cylinders. Model LT extinguishers are available separately for existing installations or in kits that include installation hardware. Standard kits include a charged extinguisher, aluminum mount bracket, aircraft "T" bar clamps, 10 feet of discharge line, 3 spray nozzles with fittings, and the activation method you choose. |
||||||||||||
 |
Model LT3 Circle Track Installed System include a charged extinguisher, aluminum mount bracket, aircraft "T" bar clamps, 10 feet of aluminum discharge line, 2 spray nozzles with fittings, and 15 foot pull cable. # 3 pound size # Great sprint car, Legends, Bandalero system |
|||||||||||
 |
Model LT5 SFI and Non SFI Installed System include a charged extinguisher, aluminum mount bracket, aircraft "T" bar clamps, 10 feet of aluminum discharge line, 3 spray nozzles with fittings, and 15 foot pull cable. # 5 pound size # Meets SCCA,NASA requirements # SFI Kit Meets NASCAR high temperature requirements |
|||||||||||
 |
Model LT10 SFI or Non SFI Circle Track Installed System include a charged extinguisher, aluminum mount bracket, aircraft "T" bar clamps, 10 feet of aluminum discharge line, 3 spray nozzles with fittings, and 15 foot pull cable. # 10 pound size # Meets SCCA,NASA requirements |
|||||||||||
 |
Key Features * Lightweight DOT approved cylinder and head combination. * Almost 1 pound lighter than other systems. * Unique Safecraft swivel head design for easier installation. * Dual discharge outlets, driver and engine. * Formed aluminum mounting bracket. * Aircraft quality "T" bolt mounting clamps. |
Available Options * Pull cable activation. view photo * Push cable activation. view photo * Push knob activation. view photo * Pneumatic activation. view photo * Halon 1301, 1211 or DuPont FE36 extinguishing agents. * Polished cylinder. * Spare filled cylinders. * Machined billet mounting clamps. |
||||||||||
 |
||||||||||||
 |
||||||||||||
 |
||||||||||||
 |
||||||||||||
|
Pull cable activation
|
Push cable activation
|
Push knob activation
|
Pneumatic activation
|
|||||||||
| Back | Livermore Performance (925)292-5522 | Top of Page |
| SAFECRAFT MODEL RS EXTINGUISHERS The Model RS extinguisher has been designed to meet or exceed all sanctioning body requirements. The discharge head is machined from billet aluminum and is designed to be actuated by pull cable, push cable or push knob. The Model RS can be activated by a combination of activation methods (example, 2 pull cables) without changing the extinguisher head. The extinguisher is capable of accepting up to three separate discharge lines that allow installation flexibility currently not found in racing fire extinguishers. With the unique Safecraft swivel head, you can mount the extinguisher cylinder in the desired location and then swivel the head to install the discharge lines and activation cables or knobs. The aluminum high-pressure cylinder is DOT approved and can be refilled. Model RS extinguishers are available in 5, 10 and 20 pound sizes. The 5 & 10 pound extinguishers are available in brushed or polished finish cylinders. |
||||||||||||
 |
Safecraft has designed their extinguisher using the same materials and techniques that they have put into their aircraft fire extinguishers for over 20 years. Because of Their extensive involvement in aircraft fire protection systems for both commercial and military aircraft, all of their Halon is recycled to the original military specification and confirmed by an independent laboratory. This assures you that each extinguisher is the highest quality with outstanding dependability. Model RS extinguishers are available separately for existing installations or in kits that include all installation hardware. Kits include a charged extinguisher, aluminum mount brackets, aircraft "T" bar clamps, 10 feet of discharge line, 3 spray nozzles and fittings, and the activation method you choose. |
|||||||||||
|
Key Features * Universal 5 way operating head machined from billet aluminum. * Brushed aluminum cylinder standard - polished cylinder available * 15 foot pull cable - trim to length needed * Activation method can be changed without purchasing a new extinguisher. * Swivel discharge head for ease of plumbing and cable connections. * High pressure DOT approved cylinders in 5, 10, & 20 pound sizes. * Three discharge ports - Driver, Fuel Cell and Engine. |
Available Options * Single pull cable activation. view photo * Dual pull cable activation. * Push cable activation. view photo * Push knob activation. view photo * Pneumatic activation. view photo * Halon 1301, 1211 or DuPont FE36 agents. * Polished cylinder. view photo * White powder coated cylinder * Machined billet mounting clamps. * Spare filled cylinders. * Steel discharge lines |
|||||||||||
|
||||||||||||
| Billet mounting brackets | ||||||||||||
|
||||||||||||
|
||||||||||||
|
||||||||||||
|
||||||||||||
|
Single pull cable activation
|
Push cable activation
|
Push knob activation
|
Pneumatic activation
|
|||||||||
| Back | Livermore Performance (925)292-5522 | Top of Page |
| SAFECRAFT BILLET MOUNT BRACKETS Safecraft's machined billet mount brackets for installed extinguisher systems adds that craftsman's touch to your vehicle. The bracket is machined from billet aluminum and polished to a mirror like shine. Billet brackets have the option of a quick release knob or a secure cap screw for a more permanent mounting This is the only bracket that off road truck and show car builders use because it will take a lot of pounding and they look great! |
||
|
Machined billet mount bracket for the 5 and 10 pound model RS, AT and LT extinguisher system. # Micro polished 6061-T6 billet aluminum # CNC machined accuracy # Lightweight, attractive design # Easy spin knob for quick bottle loading # Smooth radiused outside corners # 2 mounts per cylinder required |
|
| Back | Top of Page | |
 |
Livermore Performance, Inc. 3987 First Street, Suite G, Livermore CA 94551 Phone: (925)292-5522 E-mail: Sales@LivermorePerformance.com |
|