Brakes
Camera Mounts
Data Acquisition
Drivetrain
Engine
Lights
Lubricants
Miscellaneous
Plumbing
Safety
Steering Wheels
Suspension Components
Tanks
Timing
Tools
-----H&R - Spanner Wrench
-----Ingalls - Camber Gauge
-----Maximum Motorsports
----------Caster Camber Gauges
----------Control Arm Bushing Tool
----------Spanner Wrenches
-----Motive Products
----------Power Bleeders
----------Power Creepers
----------Power Extractor
-----Sempermed Gloves
-----Specialty Products
----------Camber Gauge
----------Ball Joint Press
----------Brake Caliper Tools
----------Lug Nut Sockets
----------Spring Compressor
----------Tie Rod Puller
-----XRP
----------Aluminum Vise Jaws
----------AN Wrenches
----------Push-On Hose Clamps
----------Push-On Hose Pliers
Wheel Spacers
Acura & Honda
BMW
Chevrolet Corvette
Ford, Lincoln, Mercury
Ford Mustang
General Motors
Infiniti & Nissan
Mazda
Mini
Porsche
Contact & Information
Store Location / Map |
 |
H&R Threaded Body Coil Over Wrenches |
|
|
|
|
| Wrenches |
Size (mm) |
Application |
P/N |
Price |
| Threaded body coil over wrenches |
68 - 75 |
Fits smaller locknut |
860.6875.01 |
$28 |
| Threaded body coil over wrenches |
80 - 90 |
Larger spring perch nut |
860.8090.01 |
$31 |
 |
Ingalls Camber-Kwik Gauge
Every shop should have the Camber-Kwik gauge for fast and easy adjustments. Just snap the magnetic head onto the spindle or rotor for Kwik camber adjustments up to ± 3-1/2° |
|
|
|
|
| Camber |
P/N |
Price |
| Camber Gauge +/- 3.5° |
92300 |
$88 |
 |
Coil-Over Spanner Wrench
The Coil-Over Spanner Wrench is used for adjusting your MM coil-over lower spring perch when pre-loading the spring is necessary. Can be used on both the front and rear MM coil-over kits. |
|
|
|
|
| MM Spanner Wrench |
P/N |
Price/ea |
| MM Coil-Over Spanner Wrench |
MMT-2 |
$9.95 |
| Bushing Removal Tool for Mustangs |
|
|
 |
The Rear Upper Control Arm Bushing Tool makes it much easier to change the rear control arm bushings at the differential. The bushings are a press fit in the differential housing, and are difficult to access. They are especially difficult to change if you are trying to do so without removing the rear axle assembly from your car. MM's unique tool makes this tough job much easier and faster. Zinc plated finish.
For 8.8" Mustang Rear Axle
|
|
 |
IRS Subframe Bushing Removal Tool, 1999-04 Cobra
MM developed this tool to help with the removal of the stock rubber bushings from the IRS subframe. Not only does this tool make the job much easier, it also reduces the time spent removing the stock bushings by at least an hour.
|
|
|
|
|
|
| Notes |
Description |
P/N |
Price/set |
| Works with 8.8" Mustang solid rear axle |
Rear Upper Control Arm Bushing Tool |
MMT-1 |
$38 |
| Works with Mustang IRS rear axle |
IRS rear differential bushing removal tool |
MMT-5 |
$18.95 |
| Works with Mustang IRS rear axle |
IRS Subframe Bushing Removal Tool |
MMT-6 |
$24 |
| Alignment Tools |
|
|
 |
|
Camber Gauge
This is the gauge used when aligning MM's race cars. With accuracy better than 1/8-degree, it easily matches the performance of much more expensive gauges. The range of camber adjustment is from seven-degrees positive to seven-degrees negative. |
|
 |
|
 |
Bumpsteer Gauge
When you need to extract the most performance from your car, don't settle for a generic bumpsteer fix. A highly tuned car, or any vehicle with modified suspension geometry, must be individually checked for bumpsteer. In order to measure bumpsteer on your car you need this professional gauge from Maximum Motorsports. Whether you are a do-it-yourself hobbyist or a specialized chassis shop, this tool will be a useful addition to your collection. Includes complete copyrighted instructions for measuring bumpsteer. Note: Correcting bumpsteer on a Mustang requires an adjustable tie-rod end kit. |
|
|
|
|
|
|
|
| Maximum Motorsports |
P/N |
Price |
| Camber Gauge |
MMT-3 |
$59 |
| Bumpsteer Gauge |
MMT-4 |
$115 |
 |
Motive Products Power Brake Bleeders - Everyone needs one so you don't have to rely on your friends to help you efficiently bleed your brakes. And you should do it often to keep your system in good shape. |
|
|
|
|
| Motive Products PowerCreeper |
|
Motive Products Power Extractor |
 |
|
 |
|
|
|
Motive Products PowerCreeper is designed for the discerning professional. It is sturdy, ergonomic, and easy to maneuver. Features include large pneumatic tires that roll right over nuts, bolts, and other obstacles. Model 1602 & 1502 features a revolutionary braking system that provides the extra stability required for frozen bolts, nuts and oil filters that are tough to work with on standard creepers. |
|
|
|
|
|
|
|
|
|
|
|
The Motive Products Power Extractor™ allows easy evacuation of engine oil, transmission fluid, other vehicle fluids. Also works as a vacuum bleeder. Pumping the integrated hand pump creates a vacuum in the tank and fluid is pulled into the unit through the attached tubing. Comes with dipstick tube for oil changing and stretchable tubing for vacuum brake bleeding. . 10 quart capacity. |
|
|
|
|
|
|
|
| Motive Products - PowerCreeper |
Brakes |
Tires |
P/N |
Price |
|
Motive Products - PowerExtractor |
P/N |
Price |
| All-terrain PowerCreeper |
No |
5" |
1501 |
$81 |
|
10 Quart Fluid Extractor |
1708 |
$59 |
| Deluxe all-terrain PowerCreeper |
Yes |
6" |
1602 |
$117 |
|
|
|
|
 |
Sempermed Gloves
SemperGuard™ Industrial Nitrile powdered and powder-free gloves are the ideal solution for individuals who are at risk of becoming sensitive to natural rubber latex. Nitrile gloves are made from a synthetic polymer exhibiting rubber-like characteristics when vulcanized. SemperGuard Industrial Nitrile gloves are designed to provide the fit, feel, tensile and tear strengths and other properties of natural rubber latex gloves without the protein allergens. Additional nitrile benefits include the ability to effectively dissipate electrostatic charges, and a higher solvent resistance over natural rubber latex. |
|
|
|
|
| Motive Products - PowerCreeper |
Size |
Length |
Width |
Qty / Box |
P/N |
Price / Box |
| Industrial Nitrile Gloves, Powdered |
Small |
230mm |
85mm |
100 |
S7963S |
$18 |
| Industrial Nitrile Gloves, Powdered |
Medium |
230mm |
95mm |
100 |
S7963M |
$18 |
| Industrial Nitrile Gloves, Powdered |
Large |
230mm |
110mm |
100 |
S7963L |
$18 |
| Industrial Nitrile Gloves, Powdered |
X-Large |
230mm |
111mm |
90 |
S7963XL |
$18 |
| Specialty Products |
|
|
|
|
 |
SPRING COMPRESSOR CLAMP SET, P/N 40240
40240 - This compressor allows for safe, economical compression of McPherson strut springs. Hooks are designed to lock the coil in place. To be used on all struts except those with vinyl coatings. Use of both hooks per spring is required. Maximum jaw opening of 230mm. |
|
|
 |
TIE ROD PULLER, P/N 8370
Removes tie rod ends with a straight, fast, firm pull. Also makes easy installation of the #87300 camber/toe kit. It has a 2-1/4" reach and a 2-1/2" spread. Also a useful tool for pressing bushings from control and trailing arms.
#83702 Replacement Tip - Large
#83703 Replacement Tip - Small
CAUTION: Not for use with impact wrenches (air tools). |
|
 |
|
|
|
 |
|
BALL JOINT PRESS W/ADAPTORS, P/N 7250
Remove and replace universal joints without "brute force" methods that can cause costly damage. Now you can take on 4WD ball joint service in addition to servicing most cars. A forcing screw-powered press, used with proper adapters, easily removes and installs all press-fit ball joints (inc. GM plastic pin C.V. type joints). Comes in a durable plastic case. |
|
 |
Package Includes:
#7248 - Press
#29503 - Receiver Tube, 3" OD x 2-3/4" ID
#29504 - Receiver Tube, 2-1/2" OD x 2-1/4" ID
#29505 - Receiver Tube, 2" OD x 1-3/4" ID
#38354 - 4WD Receiving Cup
#38355 - Installing Cup
#204508 - 4WD Installing Adapter
#305227 - Installing Adapter
#305228 - Removing Adapter |
|
|
|
|
|
|
|
|
| Spring Compressor |
P/N |
Price |
| McPherson Strut Spring Compressor |
40240 |
$45 |
| 5" Tie Rod Puller |
8370 |
$87 |
| Ball Joint Press Kit |
7250 |
$193 |
 |
|
Specialty Products - BRAKE CALIPER WINDBACK TOOL
This kit is designed to "wind" back brake caliper pistons when servicing brake calipers or replacing brake pads. This versatile kit includes nine individual adapters for both domestic and foreign applications.
APPLICATIONS:
GM, Ford, Audi, BMW, Honda, Mazda, Mercedes, Mitsubishi and Nissan.
CAUTION: Not for use with impact wrenches (air tools). |
|
 |
|
|
|
|
|
| Brake Tools |
P/N |
Price |
| Master Brake Caliper Tool Kit |
55930 |
$119 |
Specialty Products
3/4" & 13/16" FLIP SOCKET
79230 - These 1/2" square drive impact sockets are deep and thin walled to reach areas conventional sockets can't. Provides two sizes: 3/4" and 13/16" |
|
|
|
|
|
 |
19 MM & 21 MM FLIP SOCKET
79240 - These 1/2" square drive impact sockets are deep and thin walled to reach areas conventional sockets can't. Provides two sizes: 19 mm and 21 mm. |
|
|
Specialty Products - Hi Performance Lug Nut Socket Set SAE & Metric
These new alloy steel, heat treated thin walled deep sockets are specifically designed to remove wheel nuts without scratching wheels or wheel nuts. This Socket Set is available as a boxed set, or available individually. They feature protective plastic sleeves and internal plastic inserts to keep them from damaging the wheels (including aluminum wheels) and the top of the decorative lug nuts commonly found on today's hi performance vehicles. |
|
Individual Sockets - SAE 1/2" Drive
#73161: 3/4" socket
#73165: 7/8" socket
#44560: SAE replacement sleeves & inserts |
|
|
Individual Sockets
#73144: 19 mm socket |
|
|
|
 |
|
 |
|
|
|
|
|
|
|
|
| Lug Nut Sockets |
P/N |
Price |
| Deep Thin Wall Flip Sockets 3/4" - 13/16" |
79230 |
$10 |
| Deep Thin Wall Flip Sockets 19 mm - 21 mm |
79240 |
$10 |
| 19 mm Socket (while supplies last) |
73144 |
$14 |
| 3/4" Socket (while supplies last) |
73161 |
$14 |
| 7/8" Socket (while supplies last) |
73165 |
$14 |
| SAE Replacement Sleeves & Inserts (while supplies last) |
44560 |
$9 |
 |
|
 |
| Push-On Hose Clamps & Tool |
Alum. Vise Jaws |
| Size |
P/N |
Price |
P/N |
Price |
| -4 |
818404 |
$1.09 |
821010 |
$17.61 |
| -6 |
818406 |
$1.11 |
Vise Jaws - These aluminum
vise jaw inserts will protect
your hose ends during assembly.
Each has a magnetic backing to
prevent them from falling out of
the vise when opened. Includes
two jaw pieces. |
| -8 |
818408 |
$1.13 |
| -10 |
818410 |
$1.20 |
| -12 |
818412 |
$1.32 |
| Desc. |
P/N |
Price |
| Pliers |
818000 |
$82.43 |
| XRP Push-On Hose Clamps must be used for high temperature & oil line applications |
|
|
